ramips: set usb led trigger via devicetree

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / EW1200.dts

diff --git a/target/linux/ramips/dts/EW1200.dts b/target/linux/ramips/dts/EW1200.dts
index 73c5395c1922ea101e5f713a717bea557a5b159e..99bbf8c8f0886775cd4a22181589099cb8496019 100644 (file)
--- a/target/linux/ramips/dts/EW1200.dts
+++ b/target/linux/ramips/dts/EW1200.dts
@@ -6,8 +6,13 @@
 #include <dt-bindings/input/input.h>
 
 / {
+       compatible = "afoundry,ew1200", "mediatek,mt7621-soc";
        model = "EW1200";
 
+       aliases {
+               led-status = &led_run;
+       };
+
        memory@0 {
                device_type = "memory";
                reg = <0x0 0x8000000>;
@@ -25,13 +30,11 @@
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 18 1>;
+                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
@@ -39,7 +42,7 @@
        gpio-leds {
                compatible = "gpio-leds";
 
-               status {
+               led_run: run {
                        label = "ew1200:green:run";
                        gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
                };
@@ -47,6 +50,8 @@
                usb {
                        label = "ew1200:green:usb";
                        gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
+                       linux,default-trigger = "usbport";
                };
        };
 };
@@ -59,57 +64,59 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
                m25p,chunked-io = <32>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0xfb0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0xfb0000>;
+                       };
                };
        };
 };
 
 &pcie {
        status = "okay";
+};
 
-       pcie0 {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x8000>;
-                       ieee80211-freq-limit = <5000000 6000000>;
-               };
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
        };
+};
 
-       pcie1 {
-               mt76@1,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x0000>;
-                       ieee80211-freq-limit = <2400000 2500000>;
-               };
+&pcie1 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+               ieee80211-freq-limit = <2400000 2500000>;
        };
 };
 
@@ -120,7 +127,7 @@
 &pinctrl {
        state_default: pinctrl0 {
                gpio {
-                       ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+                       ralink,group = "wdt", "rgmii2", "jtag", "mdio";
                        ralink,function = "gpio";
                };
        };