ramips: add support for indicating the boot state using multiple leds

[openwrt/openwrt.git] / target / linux / ramips / dts / F7C027.dts

diff --git a/target/linux/ramips/dts/F7C027.dts b/target/linux/ramips/dts/F7C027.dts
index 532c6243b841e8c1eb4dbf96df2944ec10576e09..03587f2ffb5379b0243cc12db7c2a459df7adcd8 100644 (file)
--- a/target/linux/ramips/dts/F7C027.dts
+++ b/target/linux/ramips/dts/F7C027.dts
@@ -9,6 +9,13 @@
        compatible = "belkin,f7c027", "ralink,rt5350-soc";
        model = "Belkin F7C027";
 
+       aliases {
+               led-boot = &led_status_orange;
+               led-failsafe = &led_status_orange;
+               led-running = &led_status_orange;
+               led-upgrade = &led_status_orange;
+       };
+
        gpio-leds {
                compatible = "gpio-leds";
 
@@ -22,7 +29,7 @@
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
-               orange {
+               led_status_orange: orange {
                        label = "f7c027:orange:status";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
@@ -35,8 +42,6 @@
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                top {
@@ -63,58 +68,62 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x770000>;
-               };
-
-               partition@7c0000 {
-                       label = "firmware2";
-                       reg = <0x7c0000 0x770000>;
-               };
-
-               partition@f30000 {
-                       label = "belkin_settings";
-                       reg = <0xf30000 0xa0000>;
-               };
-
-               partition@fd0000 {
-                       label = "unknown";
-                       reg = <0xfd0000 0x10000>;
-               };
-
-               partition@fe0000 {
-                       label = "nvram";
-                       reg = <0xfe0000 0x10000>;
-               };
-
-               partition@ff0000 {
-                       label = "user_factory";
-                       reg = <0xff0000 0x10000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x770000>;
+                       };
+
+                       partition@7c0000 {
+                               label = "firmware2";
+                               reg = <0x7c0000 0x770000>;
+                       };
+
+                       partition@f30000 {
+                               label = "belkin_settings";
+                               reg = <0xf30000 0xa0000>;
+                       };
+
+                       partition@fd0000 {
+                               label = "unknown";
+                               reg = <0xfd0000 0x10000>;
+                       };
+
+                       partition@fe0000 {
+                               label = "nvram";
+                               reg = <0xfe0000 0x10000>;
+                       };
+
+                       partition@ff0000 {
+                               label = "user_factory";
+                               reg = <0xff0000 0x10000>;
+                       };
                };
        };
 };