ramips: Use dts alias based status led

[openwrt/openwrt.git] / target / linux / ramips / dts / IP2202.dts

diff --git a/target/linux/ramips/dts/IP2202.dts b/target/linux/ramips/dts/IP2202.dts
index 9eecad6ca80afe541946a04b60200d4281a4dc12..5d2149c46ed6743e3ac3edc7fc2480d1e318fdc0 100644 (file)
--- a/target/linux/ramips/dts/IP2202.dts
+++ b/target/linux/ramips/dts/IP2202.dts
@@ -1,18 +1,16 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "IP2202", "ralink,rt3052-soc";
+       compatible = "poray,ip2202", "ralink,rt3052-soc";
        model = "Poray IP2202";
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
+       aliases {
+               led-status = &led_run;
        };
 
        cfi@1f000000 {
@@ -47,25 +45,17 @@
                };
        };
 
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x28>;
-       };
-
-       esw@10110000 {
-               ralink,portmap = <0x2f>;
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
 
-               run {
+               led_run: run {
                        label = "ip2202:green:run";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                net {
                        label = "ip2202:amber:net";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -77,12 +67,29 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
+};
 
-       otg@101c0000 {
-               status = "okay";
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
+               };
        };
 };
+
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+       mediatek,portmap = <0x2f>;
+};
+
+&otg {
+       status = "okay";
+};