ramips/rt305x: Name DTS files based on scheme

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / M2M.dts

diff --git a/target/linux/ramips/dts/M2M.dts b/target/linux/ramips/dts/M2M.dts
deleted file mode 100644 (file)
index 122c70e..0000000
--- a/target/linux/ramips/dts/M2M.dts
+++ /dev/null
@@ -1,122 +0,0 @@
-/dts-v1/;
-
-#include "rt5350.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "intenso,memory2move", "ralink,rt5350-soc";
-       model = "Intenso Memory 2 Move";
-
-       aliases {
-               led-boot = &led_wifi;
-               led-failsafe = &led_wifi;
-               led-running = &led_wifi;
-               led-upgrade = &led_wifi;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600n8 root=/dev/mtdblock5";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_wifi: wifi {
-                       label = "m2m:blue:wifi";
-                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-               };
-
-               wan {
-                       label = "m2m:green:wan";
-                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-
-               power {
-                       label = "power";
-                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_POWER>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "Bootloader";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "Config";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "Factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0x7b0000>;
-                       };
-               };
-       };
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "i2c", "uartf";
-                       ralink,function = "gpio";
-               };
-       };
-};
-
-&ethernet {
-       mtd-mac-address = <&factory 0x28>;
-};
-
-&esw {
-       mediatek,portmap = <0x2f>;
-};
-
-&ehci {
-       status = "okay";
-};
-
-&ohci {
-       status = "okay";
-};
-
-&wmac {
-       ralink,mtd-eeprom = <&factory 0x0>;
-};