ramips: set usb led trigger via devicetree

[openwrt/staging/dedeckeh.git] / target / linux / ramips / dts / MINIEMBPLUG.dts

diff --git a/target/linux/ramips/dts/MINIEMBPLUG.dts b/target/linux/ramips/dts/MINIEMBPLUG.dts
index 12ff3b13a14460ef1701fe8cb05b905df0b60e22..00d057d29731d2325cc63b96f3a80dab3c7f150d 100644 (file)
--- a/target/linux/ramips/dts/MINIEMBPLUG.dts
+++ b/target/linux/ramips/dts/MINIEMBPLUG.dts
@@ -1,120 +1,128 @@
 /dts-v1/;
 
-/include/ "rt5350.dtsi"
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "MINIEMBPLUG", "ralink,rt5350-soc";
+       compatible = "omnima,miniembplug", "ralink,rt5350-soc";
        model = "Omnima MiniEMBPlug";
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "i2c", "jtag", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
 
                wlan {
                        label = "miniembplug:red:wlan";
-                       gpios = <&gpio0 9 0>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
                };
 
                mobile {
                        label = "miniembplug:green:mobile";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
+                       linux,default-trigger = "usbport";
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
 
                mode-one {
                        label = "mode1";
-                       gpios = <&gpio0 11 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
 
                mode-two {
                        label = "mode2";
-                       gpios = <&gpio0 12 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
        };
+};
 
-       palmbus@10000000 {
-               gpio0: gpio@600 {
-                       status = "okay";
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "jtag", "uartf";
+                       ralink,function = "gpio";
                };
+       };
+};
+
+&gpio0 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
 
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "mx25l6405d";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x7b0000>;
-                               };
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
                        };
                };
        };
+};
 
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4>;
-       };
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
 
-       esw@10110000 {
-               mediatek,portmap = <0x2f>;
-       };
+&esw {
+       mediatek,portmap = <0x2f>;
+};
 
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
 
-       otg@101c0000 {
-               status = "okay";
-       };
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
 };