ramips/mt7621: Name DTS files based on scheme

[openwrt/staging/lynxis.git] / target / linux / ramips / dts / MIR3G.dts

diff --git a/target/linux/ramips/dts/MIR3G.dts b/target/linux/ramips/dts/MIR3G.dts
deleted file mode 100644 (file)
index b0b63f8..0000000
--- a/target/linux/ramips/dts/MIR3G.dts
+++ /dev/null
@@ -1,207 +0,0 @@
-/dts-v1/;
-
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "xiaomi,mir3g", "mediatek,mt7621-soc";
-       model = "Xiaomi Mi Router 3G";
-
-       aliases {
-               led-boot = &led_status_yellow;
-               led-failsafe = &led_status_red;
-               led-running = &led_status_blue;
-               led-upgrade = &led_status_yellow;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x10000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_status_red: status_red {
-                       label = "mir3g:red:status";
-                       gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
-               };
-
-               led_status_blue: status_blue {
-                       label = "mir3g:blue:status";
-                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-               };
-
-               led_status_yellow: status_yellow {
-                       label = "mir3g:yellow:status";
-                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-               };
-
-               wan_amber {
-                       label = "mir3g:amber:wan";
-                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-               };
-
-               lan1_amber {
-                       label = "mir3g:amber:lan1";
-                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-               };
-
-               lan2_amber {
-                       label = "mir3g:amber:lan2";
-                       gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       button {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       reg_usb_vbus: regulator {
-               compatible = "regulator-fixed";
-               regulator-name = "usb_vbus";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-               gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-};
-
-&xhci {
-       vbus-supply = <&reg_usb_vbus>;
-};
-
-&nand {
-       status = "okay";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "Bootloader";
-                       reg = <0x0 0x80000>;
-                       read-only;
-               };
-
-               partition@80000 {
-                       label = "Config";
-                       reg = <0x80000 0x40000>;
-               };
-
-               partition@c0000 {
-                       label = "Bdata";
-                       reg = <0xc0000 0x40000>;
-                       read-only;
-               };
-
-               factory: partition@100000 {
-                       label = "Factory";
-                       reg = <0x100000 0x40000>;
-                       read-only;
-               };
-
-               partition@140000 {
-                       label = "crash";
-                       reg = <0x140000 0x40000>;
-               };
-
-               partition@180000 {
-                       label = "crash_syslog";
-                       reg = <0x180000 0x40000>;
-               };
-
-               partition@1c0000 {
-                       label = "reserved0";
-                       reg = <0x1c0000 0x40000>;
-                       read-only;
-               };
-
-               /* uboot expects to find kernels at 0x200000 & 0x600000
-                * referred to as system 1 & system 2 respectively.
-                * a kernel is considered suitable for handing control over
-                * if its linux magic number exists & uImage CRC are correct.
-                * If either of those conditions fail, a matching sys'n'_fail flag
-                * is set in uboot env & a restart performed in the hope that the
-                * alternate kernel is okay.
-                * if neither kernel checksums ok and both are marked failed, system 2
-                * is booted anyway.
-                *
-                * Note uboot's tftp flash install writes the transferred
-                * image to both kernel partitions.
-                */
-
-               partition@200000 {
-                       label = "kernel_stock";
-                       reg = <0x200000 0x400000>;
-               };
-
-               partition@600000 {
-                       label = "kernel";
-                       reg = <0x600000 0x400000>;
-               };
-
-               /* ubi partition is the result of squashing
-                * next consecutive stock partitions:
-                * - rootfs0 (rootfs partition for stock kernel0),
-                * - rootfs1 (rootfs partition for stock failsafe kernel1),
-                * - overlay (used as ubi overlay in stock fw)
-                * resulting 117,5MiB space for packages.
-                */
-
-               partition@a00000 {
-                       label = "ubi";
-                       reg = <0xa00000 0x7580000>;
-               };
-       };
-};
-
-&pcie {
-       status = "okay";
-};
-
-&pcie0 {
-       wifi@0,0 {
-               compatible = "pci14c3,7603";
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x0000>;
-               ieee80211-freq-limit = <2400000 2500000>;
-       };
-};
-
-&pcie1 {
-       wifi@0,0 {
-               compatible = "pci14c3,7662";
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
-               ieee80211-freq-limit = <5000000 6000000>;
-       };
-};
-
-&ethernet {
-       mtd-mac-address = <&factory 0xe000>;
-       mediatek,portmap = "lwlll";
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "jtag", "uart2", "uart3", "wdt";
-                       ralink,function = "gpio";
-               };
-       };
-};