+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "xiaomi,miwifi-mini", "ralink,mt7620a-soc";
- model = "Xiaomi MiWiFi Mini";
-
- aliases {
- led-boot = &led_blue;
- led-failsafe = &led_blue;
- led-running = &led_blue;
- led-upgrade = &led_blue;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_blue: blue {
- label = "miwifi-mini:blue:status";
- gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- yellow {
- label = "miwifi-mini:yellow:status";
- gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
- };
-
- red {
- label = "miwifi-mini:red:status";
- gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_RESTART>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf80000>;
- };
-
- partition@fd0000 {
- label = "crash";
- reg = <0xfd0000 0x10000>;
- };
-
- partition@fe0000 {
- label = "reserved";
- reg = <0xfe0000 0x10000>;
- read-only;
- };
-
- partition@ff0000 {
- label = "Bdata";
- reg = <0xff0000 0x10000>;
- };
- };
- };
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};
-
-ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
- mtd-mac-address = <&factory 0x28>;
- mediatek,portmap = "llllw";
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&pa_pins>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "rgmii1";
- ralink,function = "gpio";
- };
- };
-};