ramips: dts: Unify naming of gpio-keys nodes

[openwrt/openwrt.git] / target / linux / ramips / dts / MIWIFI-NANO.dts

diff --git a/target/linux/ramips/dts/MIWIFI-NANO.dts b/target/linux/ramips/dts/MIWIFI-NANO.dts
index 57a976ddf00a00aaf510740e58f59929fe36e55f..2baf5ba06dfa5f93e2804800290ccf011ea5fbb7 100644 (file)
--- a/target/linux/ramips/dts/MIWIFI-NANO.dts
+++ b/target/linux/ramips/dts/MIWIFI-NANO.dts
@@ -2,10 +2,20 @@
 
 #include "mt7628an.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "xiaomi,MiWifi Nano", "mediatek,mt7628an-soc";
+       compatible = "xiaomi,miwifi-nano", "mediatek,mt7628an-soc";
        model = "MiWiFi Nano";
 
+       aliases {
+               led-boot = &led_blue;
+               led-failsafe = &led_blue;
+               led-running = &led_blue;
+               led-upgrade = &led_blue;
+       };
+
        chosen {
                bootargs = "console=ttyS0,115200";
        };
@@ -18,21 +28,28 @@
        gpio-leds {
                compatible = "gpio-leds";
 
-               wifi {
-                       label = "miwifi-nano:blue:wifi";
-                       gpios = <&gpio0 11 1>;
-                       default-state = "1";
+               led_blue: status_blue {
+                       label = "miwifi-nano:blue:status";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
-               status {
+               status_red {
                        label = "miwifi-nano:red:status";
-                       gpios = <&gpio1 5 1>;
-                       default-state = "on";
+                       gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
                };
-               radio {
-                       label = "miwifi-nano:amber:radio";
-                       gpios = <&gpio1 12 1>;
-                       default-state = "1";
+               status_amber {
+                       label = "miwifi-nano:amber:status";
+                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
 
+               reset {
+                       label = "reset";
+                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 };
@@ -40,7 +57,7 @@
 &pinctrl {
        state_default: pinctrl0 {
                gpio {
-                       ralink,group = "refclk", "wled", "gpio";
+                       ralink,group = "refclk", "wled_an", "gpio";
                        ralink,function = "gpio";
                };
        };
@@ -48,41 +65,50 @@
 
 &wmac {
        status = "okay";
+       ralink,mtd-eeprom = <&factory 0x4>;
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
 };
 
 &spi0 {
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80";
                spi-max-frequency = <10000000>;
                m25p,chunked-io = <32>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
 
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
 
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
 
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x7b0000>;
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0xfb0000>;
+                       };
                };
        };
 };