+++ /dev/null
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- compatible = "ralink,mt7620a-v22sg-evb", "ralink,mt7620a-soc";
- model = "Ralink MT7620a V22SG High Power evaluation board";
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- aoss {
- label = "aoss";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- nand {
- compatible = "mtk,mt7620-nand";
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot-env";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- factory: partition@60000 {
- label = "factory";
- reg = <0x60000 0x20000>;
- read-only;
- };
-
- partition@80000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x80000 0x7f80000>;
- };
- };
- };
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf", "spi";
- ralink,function = "gpio";
- };
- };
-};
-
-ðernet {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
- mediatek,portmap = "llllw";
-
- port@4 {
- status = "okay";
- phy-handle = <&phy4>;
- phy-mode = "rgmii";
- };
-
- port@5 {
- status = "okay";
- phy-handle = <&phy5>;
- phy-mode = "rgmii";
- };
-
- mdio-bus {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "rgmii";
- };
- };
-};
-
-&gsw {
- mediatek,port4 = "gmac";
-};
-
-&pcie {
- status = "okay";
-};
-
-&ehci {
- status = "okay";
-};
-
-&ohci {
- status = "okay";
-};