ralink: add support for na930

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / NA930.dts

diff --git a/target/linux/ramips/dts/NA930.dts b/target/linux/ramips/dts/NA930.dts
new file mode 100644 (file)
index 0000000..6fe9964
--- /dev/null
+++ b/target/linux/ramips/dts/NA930.dts
@@ -0,0 +1,164 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+       compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
+       model = "Sercomm NA930";
+
+       chosen {
+               bootargs = "console=ttyS1,57600";
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "rgmii2", "spi", "ephy";
+                               ralink,function = "gpio";
+                       };
+                       uartf_gpio {
+                               ralink,group = "uartf";
+                               ralink,function = "gpio uartf";
+                       };
+               };
+       };
+
+       palmbus@10000000 {
+               uart@500 {
+                       status = "okay";
+               };
+
+               gpio@638 {
+                       status = "okay";
+               };
+
+               gpio@660 {
+                       status = "okay";
+               };
+       };
+
+       nand {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "mtk,mt7620-nand";
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x20000>;
+                       read-only;
+               };
+               partition@200000 {
+                       label = "factory";
+                       reg = <0x200000 0x40000>;
+                       read-only;
+               };
+               partition@240000 {
+                       label = "Config";
+                       reg = <0x240000 0x400000>;
+                       read-only;
+               };
+               partition@640000 {
+                       label = "firmware";
+                       reg = <0x640000 0x1400000>;
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+               ralink,port-map = "llllw";
+
+               port@4 {
+                       status = "okay";
+                       phy-handle = <&phy4>;
+                       phy-mode = "rgmii";
+               };
+
+               port@5 {
+                       status = "okay";
+                       phy-handle = <&phy5>;
+                       phy-mode = "rgmii";
+               };
+
+               mdio-bus {
+                       status = "okay";
+
+                       phy4: ethernet-phy@4 {
+                               reg = <4>;
+                               phy-mode = "rgmii";
+                       };
+
+                       phy5: ethernet-phy@5 {
+                               reg = <5>;
+                               phy-mode = "rgmii";
+                       };
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 11 1>;
+                       linux,code = <0x198>;
+               };
+               zwave {
+                       label = "zwave";
+                       gpios = <&gpio0 12 1>;
+                       linux,code = <0x100>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 14 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               zwave {
+                       label = "na930:blue:zwave";
+                       gpios = <&gpio2 0 1>;
+               };
+               status {
+                       label = "na930:blue:status";
+                       gpios = <&gpio2 26 1>;
+               };
+               service {
+                       label = "na930:blue:service";
+                       gpios = <&gpio2 28 1>;
+               };
+               power {
+                       label = "na930:blue:power";
+                       gpios = <&gpio2 29 1>;
+               };
+       };
+
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               telit {
+                       gpio-export,name = "telit";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 13 0>;
+               };
+       };
+
+       gsw@10110000 {
+               ralink,port4 = "gmac";
+       };
+
+       ehci@101c0000 {
+               status = "okay";
+       };
+
+       ohci@101c1000 {
+               status = "okay";
+       };
+};