/include/ "rt3883.dtsi"
/ {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "OMNI-EMB-HPM", "ralink,rt3883-soc";
model = "Omnima EMB HPM";
- memorydetect {
- ralink,memory = <0x0 0x200000 0x10000000>;
+ chosen {
+ bootargs = "console=ttyS0,115200";
};
palmbus@10000000 {
- sysc@0 {
- ralink,pinmux = "uartlite", "spi";
- ralink,gpiomux = "i2c", "jtag";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
- };
-
- timer@100 {
- status = "okay";
- };
-
- gpio0: gpio@600 {
- status = "okay";
- };
-
spi@b00 {
status = "okay";
m25p80@0 {
+ compatible = "macronix,mx25l12805d";
+ spi-max-frequency = <25000000>;
+ reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
- compatible = "mx25l6405d";
- reg = <0 0>;
- linux,modalias = "m25p80";
- spi-max-frequency = <25000000>;
+
+ partition@0 {
+ reg = <0x0 0x0030000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition@30000 {
+ reg = <0x00030000 0x00010000>;
+ label = "config";
+ read-only;
+ };
+
+ factory: partition@40000 {
+ reg = <0x00040000 0x00010000>;
+ label = "factory";
+ read-only;
+ };
+
+ partition@50000 {
+ reg = <0x00050000 0x00fb0000>;
+ label = "firmware";
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
};
};
};
ethernet@10100000 {
- status = "okay";
- ralink,phy-mask = <0x10>;
+ phy-handle = <&phy0>;
phy-mode = "rgmii";
+ mtd-mac-address = <&factory 0x28>;
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
};
wmac@10180000 {
- status = "okay";
+ ralink,mtd-eeprom = <&factory 0>;
};
ehci@101c0000 {
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
+
reset {
label = "reset";
gpios = <&gpio0 14 0>;
gpio-leds {
compatible = "gpio-leds";
-
+
power {
label = "emb:orange:power";
gpios = <&gpio0 7 1>;
};
+
status {
label = "emb:green:status";
gpios = <&gpio0 21 1>;
};
+
eth {
label = "emb:green:eth";
gpios = <&gpio0 20 1>;
};
+
eth2 {
label = "emb:red:eth";
gpios = <&gpio0 18 1>;
};
+
wifi {
label = "emb:green:wifi";
gpios = <&gpio0 17 1>;
};
+
wifi2 {
label = "emb:red:wifi";
gpios = <&gpio0 19 1>;
compatible = "gpio-export";
#size-cells = <0>;
/* gpio 12 and 13 handle the OC input */
+
usb0 {
gpio-export,name = "usb0";
gpio-export,output = <1>;
gpios = <&gpio0 2 0>;
};
+
usb1 {
gpio-export,name = "usb1";
gpio-export,output = <1>;