ramips/mt7621: Name DTS files based on scheme

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / RBM33G.dts

diff --git a/target/linux/ramips/dts/RBM33G.dts b/target/linux/ramips/dts/RBM33G.dts
deleted file mode 100644 (file)
index f40c4f7..0000000
--- a/target/linux/ramips/dts/RBM33G.dts
+++ /dev/null
@@ -1,197 +0,0 @@
-/dts-v1/;
-
-#include "mt7621.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-       compatible = "mikrotik,rbm33g", "mediatek,mt7621-soc";
-       model = "MikroTik RouterBOARD M33G";
-
-       aliases {
-               led-boot = &led_usr;
-               led-failsafe = &led_usr;
-               led-running = &led_usr;
-               led-upgrade = &led_usr;
-       };
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x10000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,115200";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_usr: usr {
-                       label = "rbm33g:green:usr";
-                       gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-
-               res {
-                       label = "res";
-                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       pcie0_vcc_reg {
-               compatible = "regulator-fixed";
-               regulator-name = "pcie0_vcc";
-
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-               regulator-boot-on;
-               regulator-always-on;
-       };
-
-       pcie1_vcc_reg {
-               compatible = "regulator-fixed";
-               regulator-name = "pcie1_vcc";
-
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-               regulator-boot-on;
-               regulator-always-on;
-       };
-
-       pcie2_vcc_reg {
-               compatible = "regulator-fixed";
-               regulator-name = "pcie2_vcc";
-
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-               regulator-boot-on;
-               regulator-always-on;
-       };
-
-       usb_vcc_reg {
-               compatible = "regulator-fixed";
-               regulator-name = "usb_vcc";
-
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-               gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-               regulator-always-on;
-       };
-};
-
-
-&spi0 {
-       status = "okay";
-
-       w25q40@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <3125000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "RouterBoot";
-                               reg = <0x0 0x40000>;
-                               read-only;
-                               compatible = "fixed-partitions";
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-
-                               partition@0 {
-                                       label = "bootloader1";
-                                       reg = <0x0 0xf000>;
-                                       read-only;
-                               };
-
-                               hard_config: partition@f000 {
-                                       label = "hard_config";
-                                       reg = <0xf000 0x1000>;
-                                       read-only;
-                               };
-
-                               partition@10000 {
-                                       label = "bootloader2";
-                                       reg = <0x10000 0xf000>;
-                                       read-only;
-                               };
-
-                               partition@20000 {
-                                       label = "soft_config";
-                                       reg = <0x20000 0x1000>;
-                               };
-
-                               partition@30000 {
-                                       label = "bios";
-                                       reg = <0x30000 0x1000>;
-                                       read-only;
-                               };
-                       };
-               };
-       };
-
-       w25q128@1 {
-               compatible = "jedec,spi-nor";
-               reg = <1>;
-               // XXX empiric value to obtain actual 10MHz SCK at the chip
-               spi-max-frequency = <3125000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       // Region <0x0 0x40000> seems reserved by OEM
-
-                       partition@40000 {
-                               compatible = "mikrotik,minor";
-                               label = "firmware";
-                               reg = <0x040000 0xFC0000>;
-                       };
-               };
-       };
-};
-
-&ethernet {
-       mtd-mac-address = <&hard_config 0x0010>;
-       mtd-mac-address-increment = <1>;
-};
-
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "uart2", "wdt";
-                       ralink,function = "gpio";
-               };
-       };
-};
-
-&sdhci {
-       status = "okay";
-};
-
-&i2c {
-       status = "okay";
-};
-
-&pcie {
-       status = "okay";
-};