ramips: add support for indicating the boot state using multiple leds

[openwrt/openwrt.git] / target / linux / ramips / dts / TEW-714TRU.dts

diff --git a/target/linux/ramips/dts/TEW-714TRU.dts b/target/linux/ramips/dts/TEW-714TRU.dts
index 0e0f066518d1dee3268305c90612299fbaf60311..b9cb5ba774f25c4943ef273f5d3a2df4b257ad38 100644 (file)
--- a/target/linux/ramips/dts/TEW-714TRU.dts
+++ b/target/linux/ramips/dts/TEW-714TRU.dts
@@ -2,8 +2,11 @@
 
 #include "rt5350.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "TEW-714TRU", "ralink,rt5350-soc";
+       compatible = "trendnet,tew-714tru", "ralink,rt5350-soc";
        model = "TRENDnet TEW714TRU";
 
        gpio-leds {
@@ -11,32 +14,32 @@
 
                usb {
                        label = "tew-714tru:red:usb";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
+                       linux,default-trigger = "usbport";
                };
 
                wifi {
                        label = "tew-714tru:green:wifi";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
-                reset {
-                        label = "reset";
-                        gpios = <&gpio0 10 1>;
-                        linux,code = <0x198>;
-                };
-
-                wps {
-                        label = "wps";
-                        gpios = <&gpio0 0 1>;
-                        linux,code = <0x211>;
-                };
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
        };
 
        gpio_export {
@@ -45,12 +48,12 @@
 
                repeater {
                        gpio-export,name = "repeater_switch";
-                       gpios = <&gpio0 7 0>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
                };
 
                wisp {
                        gpio-export,name = "wisp_switch";
-                       gpios = <&gpio0 12 0>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
                };
        };
 };
@@ -59,34 +62,37 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80", "s25fl064k";
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x7b0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
                };
        };
 };