/dts-v1/;
-#include "mt7628an.dtsi"
+#include "VOCORE2.dtsi"
#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
/ {
- compatible = "vocore,VoCore2", "mediatek,mt7628an-soc";
+ compatible = "vocore,vocore2", "mediatek,mt7628an-soc";
model = "VoCore2";
- chosen {
- bootargs = "console=ttyS2,115200";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
};
gpio-leds {
compatible = "gpio-leds";
- status {
+ led_status: status {
label = "vocore2:fuchsia:status";
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
};
};
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wled_an", "perst", "wdt";
- ralink,function = "gpio";
- };
- };
-};
-
-&wmac {
- status = "okay";
- ralink,mtd-eeprom = <&factory 0x4>;
-};
-
&spi0 {
status = "okay";
m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0xfb0000>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
};
};
};
-
-&esw {
- mediatek,portmap = <0x7>;
- mediatek,portdisable = <0x3a>;
-};
-
-&i2s {
- status = "okay";
-};
-
-&gdma {
- status = "okay";
-};
-
-&pwm {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};