ramips: add support for indicating the boot state using multiple leds

[openwrt/staging/jogo.git] / target / linux / ramips / dts / WCR-1166DS.dts

diff --git a/target/linux/ramips/dts/WCR-1166DS.dts b/target/linux/ramips/dts/WCR-1166DS.dts
index 125d98775290d713744d586eb0040e3d47f5d5e0..ca715c8ba5e5a9c0d5962ea8607c5b4eef609282 100644 (file)
--- a/target/linux/ramips/dts/WCR-1166DS.dts
+++ b/target/linux/ramips/dts/WCR-1166DS.dts
@@ -10,13 +10,14 @@
        model = "Buffalo WCR-1166DS";
 
        aliases {
-               led-status = &led_power;
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                aoss {
@@ -99,13 +100,13 @@
 
 &pcie {
        status = "okay";
-       pcie-bridge {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x8000>;
-                       ieee80211-freq-limit = <5000000 6000000>;
-               };
+};
+
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
        };
 };
 
@@ -122,51 +123,55 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
                m25p,chunked-io = <32>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x7c0000>;
-               };
-
-               partition@810000 {
-                       label = "firmware2";
-                       reg = <0x810000 0x7c0000>;
-               };
-
-               partition@fd0000 {
-                       label = "glbcfg";
-                       reg = <0xfd0000 0x10000>;
-                       read-only;
-               };
-
-               partition@fe0000 {
-                       label = "board_data";
-                       reg = <0xfe0000 0x10000>;
-                       read-only;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x7c0000>;
+                       };
+
+                       partition@810000 {
+                               label = "firmware2";
+                               reg = <0x810000 0x7c0000>;
+                       };
+
+                       partition@fd0000 {
+                               label = "glbcfg";
+                               reg = <0xfd0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@fe0000 {
+                               label = "board_data";
+                               reg = <0xfe0000 0x10000>;
+                               read-only;
+                       };
                };
        };
 };