ramips/mt7620: Name DTS files based on scheme

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / WD03.dts

diff --git a/target/linux/ramips/dts/WD03.dts b/target/linux/ramips/dts/WD03.dts
deleted file mode 100644 (file)
index bbb2ca3..0000000
--- a/target/linux/ramips/dts/WD03.dts
+++ /dev/null
@@ -1,119 +0,0 @@
-/dts-v1/;
-
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "ravpower,wd03", "ralink,mt7620n-soc";
-       model = "Ravpower WD03";
-
-       chosen {
-               bootargs = "console=ttyS0,115200";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               green-wifi {
-                       label = "wd03:green:wifi";
-                       gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
-               };
-
-
-               blue-wifi {
-                       label = "wd03:blue:wifi";
-                       gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-};
-
-&gpio2 {
-       status = "okay";
-};
-
-&gpio3 {
-       status = "okay";
-};
-
-&i2c {
-       status = "okay";
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0x7b0000>;
-                       };
-               };
-       };
-};
-
-&ehci {
-       status = "okay";
-};
-
-&ohci {
-       status = "okay";
-};
-
-&ethernet {
-       mtd-mac-address = <&factory 0x4000>;
-       ralink,port-map = "wllll";
-};
-
-&wmac {
-       ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "wled", "ephy";
-                       ralink,function = "gpio";
-               };
-       };
-};