ramips: move partitions into partition table node

[openwrt/staging/dedeckeh.git] / target / linux / ramips / dts / WF-2881.dts

diff --git a/target/linux/ramips/dts/WF-2881.dts b/target/linux/ramips/dts/WF-2881.dts
index 80676fa896d2a67a77eb5722ff1b41dae2e970e9..17011b1e393ea196fa55b524e709ab3268f75b08 100644 (file)
--- a/target/linux/ramips/dts/WF-2881.dts
+++ b/target/linux/ramips/dts/WF-2881.dts
@@ -2,11 +2,17 @@
 
 #include "mt7621.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
+       compatible = "netis,wf-2881", "mediatek,mt7621-soc";
        model = "NETIS WF-2881";
 
+       aliases {
+               led-status = &led_wps;
+       };
+
        memory@0 {
                device_type = "memory";
                reg = <0x0 0x8000000>;
@@ -21,24 +27,22 @@
 
                usb {
                        label = "wf-2881:green:usb";
-                       gpios = <&gpio0 6 1>;
+                       gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
                };
 
-               wps {
+               led_wps: wps {
                        label = "wf-2881:green:wps";
-                       gpios = <&gpio0 0 1>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 12 1>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
@@ -47,55 +51,59 @@
 &nand {
        status = "okay";
 
-       partition@0 {
-               label = "u-boot";
-               reg = <0x0 0x30000>;
-               read-only;
-       };
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
 
-       partition@30000 {
-               label = "u-boot-env";
-               reg = <0x30000 0x1000>;
-               read-only;
-       };
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
 
-       partition@80000 {
-               label = "config";
-               reg = <0x80000 0x80000>;
-               read-only;
-       };
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x1000>;
+                       read-only;
+               };
 
-       factory: partition@100000 {
-               label = "factory";
-               reg = <0x100000 0x40000>;
-               read-only;
-       };
+               partition@80000 {
+                       label = "config";
+                       reg = <0x80000 0x80000>;
+                       read-only;
+               };
 
-       partition@140000 {
-               label = "firmware";
-               reg = <0x140000 0x7E40000>;
+               factory: partition@100000 {
+                       label = "factory";
+                       reg = <0x100000 0x40000>;
+                       read-only;
+               };
+
+               partition@140000 {
+                       label = "firmware";
+                       reg = <0x140000 0x7E40000>;
+               };
        };
 };
 
 &pcie {
        status = "okay";
+};
 
-       pcie0 {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x8000>;
-                       ieee80211-freq-limit = <5000000 6000000>;
-               };
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
        };
+};
 
-       pcie1 {
-               mt76@1,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x0000>;
-                       ieee80211-freq-limit = <2400000 2500000>;
-               };
+&pcie1 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+               ieee80211-freq-limit = <2400000 2500000>;
        };
 };