ramips/mt7620: Name DTS files based on scheme

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WHR-1166D.dts

diff --git a/target/linux/ramips/dts/WHR-1166D.dts b/target/linux/ramips/dts/WHR-1166D.dts
deleted file mode 100644 (file)
index 9a6ca33..0000000
--- a/target/linux/ramips/dts/WHR-1166D.dts
+++ /dev/null
@@ -1,182 +0,0 @@
-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       compatible = "buffalo,whr-1166d", "ralink,mt7620a-soc";
-       model = "Buffalo WHR-1166D";
-
-       aliases {
-               led-boot = &led_power_green;
-               led-failsafe = &led_power_green;
-               led-running = &led_power_green;
-               led-upgrade = &led_power_green;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power {
-                       label = "whr-1166d:red:power";
-                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-               };
-
-               wifi {
-                       label = "whr-1166d:green:wifi";
-                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
-               };
-
-               led_power_green: power2 {
-                       label = "whr-1166d:green:power";
-                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-               };
-
-               wifi2 {
-                       label = "whr-1166d:orange:wifi";
-                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
-               };
-
-               internet {
-                       label = "whr-1166d:green:internet";
-                       gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
-               };
-
-               router {
-                       label = "whr-1166d:orange:router";
-                       gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
-               };
-
-               router2 {
-                       label = "whr-1166d:green:router";
-                       gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               aoss {
-                       label = "aoss";
-                       gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-
-               ap {
-                       label = "ap";
-                       gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_0>;
-                       linux,input-type = <EV_SW>;
-               };
-
-               bridge {
-                       label = "bridge";
-                       gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_0>;
-                       linux,input-type = <EV_SW>;
-               };
-       };
-};
-
-&gpio2 {
-       status = "okay";
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0xfb0000>;
-                       };
-               };
-       };
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "i2c", "uartf", "wled", "nd_sd";
-                       ralink,function = "gpio";
-               };
-       };
-};
-
-&ethernet {
-       pinctrl-names = "default";
-       pinctrl-0 = <&rgmii1_pins &mdio_pins>;
-
-       port@5 {
-               status = "okay";
-               phy-handle = <&phy5>;
-               phy-mode = "rgmii";
-       };
-
-       mdio-bus {
-               status = "okay";
-
-               phy5: ethernet-phy@5 {
-                       reg = <5>;
-                       phy-mode = "rgmii-rxid";
-               };
-       };
-};
-
-&gsw {
-       mediatek,port4 = "ephy";
-};
-
-&wmac {
-       ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pcie {
-       status = "okay";
-};
-
-&pcie0 {
-       wifi@0,0 {
-               compatible = "pci0,0";
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
-               ieee80211-freq-limit = <5000000 6000000>;
-       };
-};