#include "mt7620a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
/ {
- compatible = "ralink,mt7620a-soc";
+ compatible = "buffalo,whr-300hp2", "ralink,mt7620a-soc";
model = "Buffalo WHR-300HP2";
gpio-leds {
power {
label = "whr-300hp2:red:power";
- gpios = <&gpio0 7 1>;
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
wifi {
label = "whr-300hp2:green:wifi";
- gpios = <&gpio0 8 1>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
power2 {
label = "whr-300hp2:green:power";
- gpios = <&gpio0 9 1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "whr-300hp2:orange:wifi";
- gpios = <&gpio0 10 1>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
internet {
label = "whr-300hp2:green:internet";
- gpios = <&gpio2 17 1>;
+ gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
};
router {
label = "whr-300hp2:green:router";
- gpios = <&gpio2 18 1>;
+ gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
};
router2 {
label = "whr-300hp2:orange:router";
- gpios = <&gpio2 19 1>;
+ gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
};
};
reset {
label = "reset";
- gpios = <&gpio2 12 1>;
- linux,code = <0x198>;
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
aoss {
label = "aoss";
- gpios = <&gpio2 13 1>;
- linux,code = <0x211>;
+ gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
};
ap {
label = "ap";
- gpios = <&gpio2 14 1>;
- linux,code = <0x100>;
- linux,input-type = <5>; /* EV_SW */
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
bridge {
label = "bridge";
- gpios = <&gpio2 15 1>;
- linux,code = <0x100>;
- linux,input-type = <5>; /* EV_SW */
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
};
};
};
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "s25fl064k";
+ reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {