ralink: add support for 2 new mt7620 boards made by buffalo

[openwrt/staging/lynxis/omap.git] / target / linux / ramips / dts / WHR-600D.dts

diff --git a/target/linux/ramips/dts/WHR-600D.dts b/target/linux/ramips/dts/WHR-600D.dts
new file mode 100644 (file)
index 0000000..00d9d03
--- /dev/null
+++ b/target/linux/ramips/dts/WHR-600D.dts
@@ -0,0 +1,134 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+       compatible = "ralink,mt7620a-soc";
+       model = "Buffalo WHR-600D";
+
+       palmbus@10000000 {
+               gpio2: gpio@660 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+               
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "en25q64";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l6405d";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x6b0000>;
+                               };
+
+                               partition@700000 {
+                                       label = "usercfg";
+                                       reg = <0x700000 0x100000>;
+                               };
+                       };
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               pinctrl-names = "default";
+               pinctrl-0 = <&ephy_pins>;
+
+               ralink,port-map = "llllw";
+       };
+
+       gsw@10110000 {
+               ralink,port4 = "ephy";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "buffalo:red:power";
+                       gpios = <&gpio0 7 1>;
+               };
+               status {
+                       label = "buffalo:green:status";
+                       gpios = <&gpio0 8 1>;
+               };
+               power2 {
+                       label = "buffalo:green:power";
+                       gpios = <&gpio0 9 1>;
+               };
+               status2 {
+                       label = "buffalo:orange:status";
+                       gpios = <&gpio0 10 1>;
+               };
+               internet {
+                       label = "buffalo:green:internet";
+                       gpios = <&gpio2 17 1>;
+               };
+               router {
+                       label = "buffalo:green:router";
+                       gpios = <&gpio2 18 1>;
+               };
+               router2 {
+                       label = "buffalo:orange:router";
+                       gpios = <&gpio2 19 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               s1 {
+                       label = "reset";
+                       gpios = <&gpio2 12 1>;
+                       linux,code = <0x100>;
+               };
+               s2 {
+                       label = "aoss";
+                       gpios = <&gpio2 13 1>;
+                       linux,code = <0x101>;
+               };
+               s3 {
+                       label = "ap";
+                       gpios = <&gpio2 14 1>;
+                       linux,code = <0x102>;
+               };
+               s4 {
+                       label = "bridge";
+                       gpios = <&gpio2 15 1>;
+                       linux,code = <0x103>;
+               };
+       };
+};