/dts-v1/;
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
+ compatible = "buffalo,wli-tx4-ag300n", "ralink,rt2880-soc";
model = "Buffalo WLI-TX4-AG300N";
- palmbus@300000 {
- sysc@0 {
- ralink,pinmux = "uartlite";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <1>;
- };
-
- gpio0: gpio@600 {
- status = "okay";
- };
+ aliases {
+ led-status = &led_power;
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
reg = <0x0 0x30000>;
read-only;
};
+
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
- partition@40000 {
- label = "calibration";
+
+ factory: partition@40000 {
+ label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
+
partition@50000 {
- label = "linux";
+ label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
- ethernet@400000 {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
-
- port@0 {
- ralink,fixed-link = <1000 1 1 1>;
- };
- };
-
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
+
wps {
label = "wps";
- gpios = <&gpio0 0 1>;
- linux,code = <0x211>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
};
+
bandwidth {
label = "bandwidth";
- gpios = <&gpio0 8 0>;
- linux,code = <0x198>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
};
+
reset {
label = "reset";
- gpios = <&gpio0 9 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
};
compatible = "gpio-leds";
diag {
- label = "buffalo:red:diag";
- gpios = <&gpio0 10 1>;
+ label = "wli-tx4-ag300n:red:diag";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
- power {
- label = "buffalo:blue:power";
- gpios = <&gpio0 12 1>;
+
+ led_power: power {
+ label = "wli-tx4-ag300n:blue:power";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
+
security {
- label = "buffalo:blue:security";
- gpios = <&gpio0 13 1>;
+ label = "wli-tx4-ag300n:blue:security";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+
+ port@0 {
+ mediatek,fixed-link = <100 1 1 1>;
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ phy-mode = "mii";
+ reg = <0>;
};
};
};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};