ramips: add support for Sitecom WLR-6000

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / WLR-6000.dts

diff --git a/target/linux/ramips/dts/WLR-6000.dts b/target/linux/ramips/dts/WLR-6000.dts
new file mode 100644 (file)
index 0000000..ff30969
--- /dev/null
+++ b/target/linux/ramips/dts/WLR-6000.dts
@@ -0,0 +1,186 @@
+/dts-v1/;
+
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Sitecom WLR-6000";
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "wlr-6000:red:power";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+               };
+
+               ops {
+                       label = "wlr-6000:white:ops";
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               usb {
+                       gpio-export,name = "usb";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&gpio1 {
+       status = "okay";
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "jtag", "uartf";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       status = "okay";
+       mtd-mac-address = <&factory 0x8004>;
+       mtd-mac-address-increment = <1>;
+
+       port@0 {
+               phy-handle = <&phy0>;
+               phy-mode = "rgmii";
+       };
+
+       mdio-bus {
+               status = "okay";
+
+               phy0: ethernet-phy@0 {
+                       reg = <0>;
+                       phy-mode = "rgmii";
+
+                       qca,ar8327-initvals = <
+                               0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+                               0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+                               0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
+                               0x50 0xc437c437 /* LED Control Register 0 */
+                               0x54 0xc337c337 /* LED Control Register 1 */
+                               0x58 0x00000000 /* LED Control Register 2 */
+                               0x5c 0x03ffff00 /* LED Control Register 3 */
+                               0x7c 0x0000007e /* PORT0_STATUS */
+                               0x94 0x0000007e /* PORT6 STATUS */
+                       >;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <8600000>;
+               m25p,fast-read;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x713000>;
+               };
+
+               partition@763000 {
+                       label = "manufacture";
+                       reg = <0x763000 0x7D000>;
+                       read-only;
+               };
+
+               partition@7E0000 {
+                       label = "backup";
+                       reg = <0x7E0000 0x10000>;
+                       read-only;
+               };
+
+               partition@7F0000 {
+                       label = "storage";
+                       reg = <0x7F0000 0x10000>;
+                       read-only;
+               };
+       };
+};
+
+&pci {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pci_pins>;
+
+       pci_pins: pci {
+               pci {
+                       ralink,group = "pci";
+                       ralink,function = "pci-fnc";
+               };
+       };
+
+       host-bridge {
+               pci-bridge@1 {
+                       status = "okay";
+
+                       wifi@1814,3091 {
+                               compatible = "pci1814,3091";
+                               reg = <0x10000 0 0 0 0>;
+                               ralink,mtd-eeprom = <&factory 0x8000>;
+                       };
+               };
+       };
+};
+
+&wmac {
+       status = "okay";
+       ralink,2ghz = <0>;
+       ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};