ramips: use pinmux nodes from dtsi
[openwrt/openwrt.git] / target / linux / ramips / dts / WT1520-4M.dts
index 97f03b5e75ef0a16a2f84aaa9135cd782310d277..358d839534e50940669ae10449aa057e8f64dd41 100644 (file)
@@ -1,42 +1,43 @@
 /dts-v1/;
 
-/include/ "WT1520.dtsi"
+#include "WT1520.dtsi"
 
 / {
-       palmbus@10000000 {
-               spi@b00 {
-                       status = "okay";
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "w25q32";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80", "s25fl064k";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x3b0000>;
-                               };
-                       };
+       compatible = "nexx,wt1520-4m", "nexx,wt1520", "ralink,rt5350-soc";
+       model = "Nexx WT1520 (4M)";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x3b0000>;
                };
        };
 };