ramips: add support for indicating the boot state using multiple leds

[openwrt/openwrt.git] / target / linux / ramips / dts / WT3020-8M.dts

diff --git a/target/linux/ramips/dts/WT3020-8M.dts b/target/linux/ramips/dts/WT3020-8M.dts
index 4ef48cb14efe4b19df5661aab1a590fd064b8133..7e75ad3a53fe6d8c073e8f6babcfbc1ef5b3d133 100644 (file)
--- a/target/linux/ramips/dts/WT3020-8M.dts
+++ b/target/linux/ramips/dts/WT3020-8M.dts
@@ -1,41 +1,17 @@
 /dts-v1/;
 
-#include "mt7620n.dtsi"
-
-#include <dt-bindings/input/input.h>
+#include "WT3020.dtsi"
 
 / {
-       compatible = "wt3020", "ralink,mt7620n-soc";
+       compatible = "nexx,wt3020-8m", "nexx,wt3020", "ralink,mt7620n-soc";
        model = "Nexx WT3020 (8M)";
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 1 1>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               power {
-                       label = "wt3020:blue:power";
-                       gpios = <&gpio3 0 0>;
-               };
-       };
 };
 
-&gpio2 {
+&ehci {
        status = "okay";
 };
 
-&gpio3 {
+&ohci {
        status = "okay";
 };
 
@@ -43,60 +19,37 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80", "w25q64";
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x7b0000>;
-               };
-       };
-};
-
-&ehci {
-       status = "okay";
-};
-
-&ohci {
-       status = "okay";
-};
-
-&ethernet {
-       mtd-mac-address = <&factory 0x4>;
-       mediatek,portmap = "wllll";
-};
-
-&wmac {
-       ralink,mtd-eeprom = <&factory 0>;
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               default {
-                       ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf";
-                       ralink,function = "gpio";
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
                };
        };
 };