ramips: move partitions into partition table node
[openwrt/staging/dedeckeh.git] / target / linux / ramips / dts / ZBT-WE1326.dts
index 0dc2c77a3996aea60eab2215477ac7d6f5763846..09e7ba33b1342ff77384a0dfd163c860f534421b 100644 (file)
@@ -6,6 +6,7 @@
 #include <dt-bindings/input/input.h>
 
 / {
+       compatible = "zbtlink,zbt-we1326", "mediatek,mt7621-soc";
        model = "ZBT-WE1326";
 
        chosen {
@@ -19,8 +20,6 @@
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
                m25p,chunked-io = <32>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0xfb0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0xfb0000>;
+                       };
                };
        };
 };
 
 &pcie {
        status = "okay";
+};
 
-       pcie0 {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x8000>;
-                       ieee80211-freq-limit = <5000000 6000000>;
-               };
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
        };
+};
 
-       pcie1 {
-               mt76@1,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x0000>;
-                       ieee80211-freq-limit = <2400000 2500000>;
-               };
+&pcie1 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+               ieee80211-freq-limit = <2400000 2500000>;
        };
 };