ramips/mt7620: Name DTS files based on scheme
[openwrt/staging/jow.git] / target / linux / ramips / dts / mt7620a_buffalo_whr-600d.dts
diff --git a/target/linux/ramips/dts/mt7620a_buffalo_whr-600d.dts b/target/linux/ramips/dts/mt7620a_buffalo_whr-600d.dts
new file mode 100644 (file)
index 0000000..f4b5661
--- /dev/null
@@ -0,0 +1,168 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "buffalo,whr-600d", "ralink,mt7620a-soc";
+       model = "Buffalo WHR-600D";
+
+       aliases {
+               led-boot = &led_power_green;
+               led-failsafe = &led_power_green;
+               led-running = &led_power_green;
+               led-upgrade = &led_power_green;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "whr-600d:red:power";
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+               };
+
+               wifi {
+                       label = "whr-600d:green:wifi";
+                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+               };
+
+               led_power_green: power2 {
+                       label = "whr-600d:green:power";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+               };
+
+               wifi2 {
+                       label = "whr-600d:orange:wifi";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+               };
+
+               internet {
+                       label = "whr-600d:green:internet";
+                       gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
+               };
+
+               router {
+                       label = "whr-600d:green:router";
+                       gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+               };
+
+               router2 {
+                       label = "whr-600d:orange:router";
+                       gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               aoss {
+                       label = "aoss";
+                       gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               ap {
+                       label = "ap";
+                       gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
+               };
+
+               bridge {
+                       label = "bridge";
+                       gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
+               };
+       };
+};
+
+&gpio2 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       pinctrl-names = "default";
+       pinctrl-0 = <&ephy_pins>;
+       mtd-mac-address = <&factory 0x4>;
+       mediatek,portmap = "llllw";
+};
+
+&gsw {
+       mediatek,port4 = "ephy";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       wifi@0,0 {
+               compatible = "pci1814,5592";
+               reg = <0x0000 0 0 0 0>;
+               ralink,mtd-eeprom = <&factory 0x8000>;
+       };
+};