ramips: create shared DTSI for DIR-810L and TEW-810DR

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_cameo_810.dtsi

diff --git a/target/linux/ramips/dts/mt7620a_cameo_810.dtsi b/target/linux/ramips/dts/mt7620a_cameo_810.dtsi
new file mode 100644 (file)
index 0000000..8ab166d
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_cameo_810.dtsi
@@ -0,0 +1,116 @@
+//SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       factory5g: partition@50000 {
+                               label = "factory5g";
+                               reg = <0x50000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "Wolf_Config";
+                               reg = <0x60000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@70000 {
+                               label = "MyDlink";
+                               reg = <0x70000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@f0000 {
+                               label = "Jffs2";
+                               reg = <0xf0000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@170000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x170000 0x690000>;
+                       };
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
+
+       mediatek,portmap = "llllw";
+};
+
+&wmac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pa_pins>;
+
+       ralink,mtd-eeprom = <&factory 0x0>;
+       mtd-mac-address = <&factory 0x28>;
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       wifi@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
+               mtd-mac-address = <&factory 0x28>;
+               mtd-mac-address-increment = <2>;
+       };
+};