ramips/mt7620: Name DTS files based on scheme

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_glinet_gl-mt300n.dts

diff --git a/target/linux/ramips/dts/mt7620a_glinet_gl-mt300n.dts b/target/linux/ramips/dts/mt7620a_glinet_gl-mt300n.dts
new file mode 100644 (file)
index 0000000..a30792c
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_glinet_gl-mt300n.dts
@@ -0,0 +1,142 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "glinet,gl-mt300n", "ralink,mt7620a-soc";
+       model = "GL-MT300N";
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               wan {
+                       label = "gl-mt300n:wan";
+                       gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+               };
+
+               lan {
+                       label = "gl-mt300n:lan";
+                       gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+               };
+
+               wlan {
+                       label = "gl-mt300n:wlan";
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               BTN_0 {
+                       label = "BTN_0";
+                       gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+               };
+
+               BTN_1 {
+                       label = "BTN_1";
+                       gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_1>;
+               };
+       };
+};
+
+&gpio0 {
+       status = "okay";
+};
+
+&gpio1 {
+       status = "okay";
+};
+
+&gpio2 {
+       status = "okay";
+};
+
+&gpio3 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0xf80000>;
+                       };
+
+                       partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x10000>;
+                       };
+               };
+       };
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4000>;
+       mediatek,portmap = "wllll";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "wled","ephy","i2c";
+                       ralink,function = "gpio";
+               };
+       };
+};