ramips: add support for TP-Link Archer C5 v4

[openwrt/staging/981213.git] / target / linux / ramips / dts / mt7620a_tplink_archer-c5-v4.dts

diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c5-v4.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c5-v4.dts
new file mode 100644 (file)
index 0000000..4707bdf
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c5-v4.dts
@@ -0,0 +1,127 @@
+#include <dt-bindings/leds/common.h>
+
+#include "mt7620a_tplink_archer.dtsi"
+
+/ {
+       compatible = "tplink,archer-c5-v4", "ralink,mt7620a-soc";
+       model = "TP-Link Archer C5 v4";
+
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+               label-mac-device = &ethernet;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_power: led-0 {
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+               };
+
+               led-1 {
+                       function = LED_FUNCTION_WLAN;
+                       color = <LED_COLOR_ID_GREEN>;
+                       function-enumerator = <2>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               led-2 {
+                       function = LED_FUNCTION_WLAN;
+                       color = <LED_COLOR_ID_GREEN>;
+                       function-enumerator = <5>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               led-3 {
+                       function = LED_FUNCTION_WAN;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+               };
+
+               led-4 {
+                       function = LED_FUNCTION_WAN;
+                       color = <LED_COLOR_ID_ORANGE>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+               };
+
+               led-5 {
+                       function = LED_FUNCTION_LAN;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+               };
+
+               led-6 {
+                       function = LED_FUNCTION_USB;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
+                       linux,default-trigger = "usbport";
+               };
+
+               led-7 {
+                       function = LED_FUNCTION_WPS;
+                       color = <LED_COLOR_ID_GREEN>;
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       rtl8367s {
+               compatible = "realtek,rtl8367b";
+               cpu_port = <7>;
+               realtek,extif2 = <1 0 1 1 1 1 1 1 2>;
+               mii-bus = <&mdio0>;
+               phy-id = <29>;
+       };
+};
+
+&spi0 {
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "i2c", "uartf", "ephy", "rgmii2";
+               function = "gpio";
+       };
+};
+
+&ethernet {
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+
+       port@5 {
+               status = "okay";
+               mediatek,fixed-link = <1000 1 1 1>;
+               phy-mode = "rgmii";
+       };
+
+       mdio0: mdio-bus {
+               status = "okay";
+               reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+               reset-delay-us = <10000>;
+       };
+};
+
+&wmac {
+       pinctrl-names = "default", "pa_gpio";
+       pinctrl-0 = <&pa_pins>;
+       pinctrl-1 = <&pa_gpio_pins>;
+
+       nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100 0>;
+       nvmem-cell-names = "eeprom", "mac-address";
+};
+
+&wifi {
+       nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 2>;
+       nvmem-cell-names = "eeprom", "mac-address";
+};