ramips: update ZBT WE1026 DTS-files

[openwrt/staging/jow.git] / target / linux / ramips / dts / mt7620a_zbtlink_zbt-we1026.dtsi

diff --git a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we1026.dtsi b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we1026.dtsi
new file mode 100644 (file)
index 0000000..d5a6d53
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we1026.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "zbtlink,zbt-we1026", "ralink,mt7620a-soc";
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       aliases {
+               label-mac-device = &wmac;
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       firmware: partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                       };
+               };
+       };
+};
+
+&gpio2 {
+       status = "okay";
+};
+
+&gpio3 {
+       status = "okay";
+};
+
+&sdhci {
+       status = "okay";
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               default {
+                       ralink,group = "i2c", "uartf", "spi refclk", "ephy", "wled";
+                       ralink,function = "gpio";
+               };
+       };
+};