ramips/mt7620: Name DTS files based on scheme

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620n_dlink_dwr-922-e2.dts

diff --git a/target/linux/ramips/dts/mt7620n_dlink_dwr-922-e2.dts b/target/linux/ramips/dts/mt7620n_dlink_dwr-922-e2.dts
new file mode 100644 (file)
index 0000000..c2dd26a
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620n_dlink_dwr-922-e2.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "dlink,dwr-922-e2", "ralink,mt7620n-soc";
+       model = "D-Link DWR-922 E2";
+
+       aliases {
+               led-boot = &sstrengthg;
+               led-failsafe = &sstrengthg;
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               led-boot = &sstrengthg;
+
+               sms {
+                       label = "dwr-922-e2:green:sms";
+                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+               };
+
+               lan {
+                       label = "dwr-922-e2:green:lan";
+                       gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+               };
+
+               sstrengthg: sstrengthg {
+                       label = "dwr-922-e2:green:sigstrength";
+                       gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+               };
+
+               sstrengthr {
+                       label = "dwr-922-e2:red:sigstrength";
+                       gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+               };
+
+               4g {
+                       label = "dwr-922-e2:green:4g";
+                       gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+               };
+
+               3g {
+                       label = "dwr-922-e2:green:3g";
+                       gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+               };
+
+               wifi {
+                       label = "dwr-922-e2:green:wifi";
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               lte_modem_enable {
+                       gpio-export,name = "lte_modem_enable";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&gpio1 {
+       status = "okay";
+};
+
+&gpio2 {
+       status = "okay";
+};
+
+&gpio3 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "jboot";
+                               reg = <0x0 0x10000>;
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               compatible = "amit,jimage";
+                               label = "firmware";
+                               reg = <0x10000 0xfe0000>;
+                       };
+
+                       config: partition@ff0000 {
+                               label = "config";
+                               reg = <0xff0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};
+
+&ethernet {
+       port@4 {
+               status = "okay";
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               default {
+                       ralink,group = "spi refclk", "i2c", "ephy", "wled";
+                       ralink,function = "gpio";
+               };
+       };
+};