-/dts-v1/;
-
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
led-upgrade = &led_power;
};
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
leds {
compatible = "gpio-leds";
led_power: power {
- label = "firewrt:green:power";
- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+ label = "green:power";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
};
};
keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
+ compatible = "gpio-keys";
wps {
label = "wps";
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
power {
label = "power";
- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
};
&spi0 {
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
};
};
-ðernet {
+&gmac0 {
mtd-mac-address = <&factory 0xe000>;
};
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "wdt", "rgmii2";
- ralink,function = "gpio";
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
};
+
+ port@3 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "wan";
+ mtd-mac-address = <&factory 0xe000>;
+ mac-address-increment = <1>;
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "wdt", "rgmii2";
+ function = "gpio";
};
};