ramips: add support for Linksys E7350

[openwrt/staging/jow.git] / target / linux / ramips / dts / mt7621_linksys_e7350.dts

diff --git a/target/linux/ramips/dts/mt7621_linksys_e7350.dts b/target/linux/ramips/dts/mt7621_linksys_e7350.dts
new file mode 100644 (file)
index 0000000..0cdfcb4
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_linksys_e7350.dts
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+       compatible = "linksys,e7350", "mediatek,mt7621-soc";
+       model = "Linksys E7350";
+
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led-wps {
+                       color = <LED_COLOR_ID_AMBER>;
+                       function = LED_FUNCTION_WPS;
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+               };
+
+               led_power: led-power {
+                       label = "blue:power";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               led-wan {
+                       color = <LED_COLOR_ID_AMBER>;
+                       function = LED_FUNCTION_WAN;
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+
+               led-wan2 {
+                       color = <LED_COLOR_ID_BLUE>;
+                       function = LED_FUNCTION_WAN;
+                       gpios = <&switch0 0 GPIO_ACTIVE_LOW>;
+               };
+
+               led-lan4 {
+                       color = <LED_COLOR_ID_BLUE>;
+                       function = LED_FUNCTION_LAN;
+                       function-enumerator = <4>;
+                       gpios = <&switch0 3 GPIO_ACTIVE_LOW>;
+               };
+
+               led-lan3 {
+                       color = <LED_COLOR_ID_BLUE>;
+                       function = LED_FUNCTION_LAN;
+                       function-enumerator = <3>;
+                       gpios = <&switch0 6 GPIO_ACTIVE_LOW>;
+               };
+
+               led-lan2 {
+                       color = <LED_COLOR_ID_BLUE>;
+                       function = LED_FUNCTION_LAN;
+                       function-enumerator = <2>;
+                       gpios = <&switch0 9 GPIO_ACTIVE_HIGH>;
+               };
+
+               led-lan1 {
+                       color = <LED_COLOR_ID_BLUE>;
+                       function = LED_FUNCTION_LAN;
+                       function-enumerator = <1>;
+                       gpios = <&switch0 12 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&nand {
+       status = "okay";
+
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       label = "Boot";
+                       reg = <0x0 0x80000>;
+                       read-only;
+               };
+
+               partition@80000 {
+                       label = "Config";
+                       reg = <0x80000 0x80000>;
+               };
+
+               factory: partition@100000 {
+                       label = "Factory";
+                       reg = <0x100000 0x80000>;
+                       read-only;
+               };
+
+               partition@180000 {
+                       label = "firmware";
+                       reg = <0x180000 0x3000000>;
+
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "kernel";
+                               reg = <0x0 0x400000>;
+                       };
+
+                       partition@400000 {
+                               label = "ubi";
+                               reg = <0x400000 0x2c00000>;
+                       };
+               };
+
+               partition@3180000 {
+                       label = "alt_firmware";
+                       reg = <0x3180000 0x3000000>;
+                       read-only;
+               };
+
+               partition@6180000 {
+                       label = "cbtinfo";
+                       reg = <0x6180000 0x80000>;
+                       read-only;
+               };
+               /* seems to be the end here. Can't read past 0x6200000 */
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie1 {
+       wifi@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+       };
+};
+
+&gmac1 {
+       status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy0>;
+};
+
+&mdio {
+       ethphy0: ethernet-phy@0 {
+               reg = <0>;
+       };
+};
+
+&switch0 {
+       gpio-controller;
+       #gpio-cells = <2>;
+
+       ports {
+               port@1 {
+                       status = "okay";
+                       label = "lan4";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan3";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@4 {
+                       status = "okay";
+                       label = "lan1";
+               };
+       };
+};