ramips: add support for MeiG SLT866 4G CPE

[openwrt/staging/hauke.git] / target / linux / ramips / dts / mt7621_meig_slt866.dts

diff --git a/target/linux/ramips/dts/mt7621_meig_slt866.dts b/target/linux/ramips/dts/mt7621_meig_slt866.dts
new file mode 100644 (file)
index 0000000..19d2f0f
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_meig_slt866.dts
@@ -0,0 +1,245 @@
+#include "mt7621.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+       compatible = "meig,slt866", "mediatek,mt7621-soc";
+       model = "MeiG SLT866";
+
+       aliases {
+               led-boot = &led_internet;
+               led-failsafe = &led_internet;
+               led-upgrade = &led_internet;
+               label-mac-device = &gmac1;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               signal4 {
+                       label = "blue:signal4";
+                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+               };
+
+               lanwan {
+                       label = "blue:lanwan";
+                       gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_internet: internet {
+                       label = "blue:internet";
+                       gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
+               };
+
+               wifi {
+                       label = "blue:wifi";
+                       gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               signal3 {
+                       label = "blue:signal3";
+                       gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+               };
+
+               signal2 {
+                       label = "blue:signal2";
+                       gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+               };
+
+               signal1 {
+                       label = "blue:signal1";
+                       gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       regulator-pa-5g {
+               compatible = "regulator-fixed";
+               regulator-name = "pa-5g";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               gpio = <&gpio 7 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "jtag", "uart2", "uart3", "wdt";
+               function = "gpio";
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               reg = <0>;
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <20000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "Bootloader";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "Config";
+                               reg = <0x30000 0x10000>;
+                       };
+
+                       partition@40000 {
+                               label = "Factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                               compatible = "nvmem-cells";
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       eeprom_factory_8000: eeprom@8000 {
+                                               reg = <0x8000 0x4da8>;
+                                       };
+                               };
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               compatible = "denx,uimage";
+                               reg = <0x50000 0xf90000>;
+                       };
+
+                       partition@fe0000 {
+                               label = "m_custom";
+                               reg = <0xfe0000 0x20000>;
+                               read-only;
+                               compatible = "nvmem-cells";
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_custom_0: macaddr@0 {
+                                               reg = <0x0 0xc>;
+                                               compatible = "mac-base";
+                                               #nvmem-cell-cells = <1>;
+                                       };
+
+                                       macaddr_custom_40: macaddr@40 {
+                                               reg = <0x40 0xc>;
+                                               compatible = "mac-base";
+                                               #nvmem-cell-cells = <1>;
+                                       };
+
+                                       macaddr_custom_100: macaddr@100 {
+                                               reg = <0x100 0xc>;
+                                               compatible = "mac-base";
+                                               #nvmem-cell-cells = <1>;
+                                       };
+
+                                       macaddr_custom_140: macaddr@140 {
+                                               reg = <0x140 0xc>;
+                                               compatible = "mac-base";
+                                               #nvmem-cell-cells = <1>;
+                                       };
+                               };
+                       };
+
+                       partition@1000000 {
+                               label = "fota_bak";
+                               reg = <0x1000000 0x1000000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&ethernet {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mdio_pins>;
+};
+
+&gmac0 {
+       nvmem-cells = <&macaddr_custom_40 0>;
+       nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+       status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy4>;
+
+       nvmem-cells = <&macaddr_custom_0 0>;
+       nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+       ethphy4: ethernet-phy@4 {
+               reg = <4>;
+       };
+};
+
+&switch0 {
+       ports {
+               port@3 {
+                       status = "okay";
+                       label = "lan";
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       mt76@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+               nvmem-cells = <&eeprom_factory_0>, <&macaddr_custom_100 0>;
+               nvmem-cell-names = "eeprom", "mac-address";
+       };
+};
+
+&pcie1 {
+       mt76@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+               ieee80211-freq-limit = <5000000 6000000>;
+               nvmem-cells = <&eeprom_factory_8000>, <&macaddr_custom_140 0>;
+               nvmem-cell-names = "eeprom", "mac-address";
+       };
+};