ramips/mt7621: Name DTS files based on scheme
[openwrt/staging/jow.git] / target / linux / ramips / dts / mt7621_netgear_ex6150.dts
diff --git a/target/linux/ramips/dts/mt7621_netgear_ex6150.dts b/target/linux/ramips/dts/mt7621_netgear_ex6150.dts
new file mode 100644 (file)
index 0000000..a5827f2
--- /dev/null
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "netgear,ex6150", "mediatek,mt7621-soc";
+       model = "Netgear EX6150";
+
+       aliases {
+               led-boot = &power_green;
+               led-failsafe = &power_amber;
+               led-running = &power_green;
+               led-upgrade = &power_amber;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power_amber: power_amber {
+                       label = "ex6150:amber:power";
+                       gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+               };
+
+               power_green: power_green {
+                       label = "ex6150:green:power";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+               };
+
+               wps {
+                       label = "ex6150:green:wps";
+                       gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+               };
+
+               rightarrow {
+                       label = "ex6150:blue:rightarrow";
+                       gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+               };
+
+               leftarrow {
+                       label = "ex6150:blue:leftarrow";
+                       gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+               };
+
+               router_green {
+                       label = "ex6150:green:router";
+                       gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               router_red {
+                       label = "ex6150:red:router";
+                       gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+               };
+
+               client_green {
+                       label = "ex6150:green:client";
+                       gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               client_red {
+                       label = "ex6150:red:client";
+                       gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               toggle {
+                       label = "AP/Extender toggle";
+                       gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       /* Active when switch is set to "Access Point" */
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "config";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0xe80000>;
+                       };
+
+                       partition@ed0000 {
+                               label = "ML1";
+                               reg = <0xed0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@ef0000 {
+                               label = "ML2";
+                               reg = <0xef0000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@f10000 {
+                               label = "ML3";
+                               reg = <0xf10000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@f30000 {
+                               label = "ML4";
+                               reg = <0xf30000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@f50000 {
+                               label = "ML5";
+                               reg = <0xf50000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@f70000 {
+                               label = "ML6";
+                               reg = <0xf70000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@f90000 {
+                               label = "ML7";
+                               reg = <0xf90000 0x20000>;
+                               read-only;
+                       };
+
+                       partition@fb0000 {
+                               label = "T_Meter1";
+                               reg = <0xfb0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@fc0000 {
+                               label = "T_Meter2";
+                               reg = <0xfc0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@fd0000 {
+                               label = "POT";
+                               reg = <0xfd0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@fe0000 {
+                               label = "board_data";
+                               reg = <0xfe0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@ff0000 {
+                               label = "nvram";
+                               reg = <0xff0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       wifi@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
+       };
+};
+
+&pcie1 {
+       wifi@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+               ieee80211-freq-limit = <2400000 2500000>;
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x00000004>;
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "sdhci", "rgmii2", "jtag";
+                       ralink,function = "gpio";
+               };
+       };
+};