ramips: convert most mtd-mac-address cases in DTSI to nvmem

[openwrt/staging/wigyori.git] / target / linux / ramips / dts / mt7621_netgear_sercomm_ayx.dtsi

diff --git a/target/linux/ramips/dts/mt7621_netgear_sercomm_ayx.dtsi b/target/linux/ramips/dts/mt7621_netgear_sercomm_ayx.dtsi
index 864952f25f5a448e9b825b7520643ce9ed14eb9f..ae9e40e621160f4c914cd67ffa466d52ddb9a497 100644 (file)
--- a/target/linux/ramips/dts/mt7621_netgear_sercomm_ayx.dtsi
+++ b/target/linux/ramips/dts/mt7621_netgear_sercomm_ayx.dtsi
@@ -1,4 +1,4 @@
-// SPDX-License-Identifier: GPL-2.0
+// SPDX-License-Identifier: GPL-2.0-only
 
 #include "mt7621.dtsi"
 
@@ -13,11 +13,6 @@
                led-failsafe = &led_power;
                led-running = &led_power;
                led-upgrade = &led_power;
-               label-mac-device = &ethernet;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600";
        };
 
        keys {
@@ -25,19 +20,19 @@
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
 
                wifi {
                        label = "wifi";
-                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RFKILL>;
                };
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
@@ -46,26 +41,31 @@
                compatible = "gpio-leds";
 
                led_power: power {
-                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+                       label = "green:power";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
                };
 
-               led_usb: usb {
-                       gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+               usb {
+                       label = "green:usb";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
                        linux,default-trigger = "usbport";
                };
 
-               led_internet: internet {
-                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+               internet {
+                       label = "green:wan";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                };
 
-               led_wifi: wifi {
-                       gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+               wifi {
+                       label = "green:wifi";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };
 
-               led_wps: wps {
-                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+               wps {
+                       label = "green:wps";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -74,7 +74,7 @@
                regulator-name = "usb_vbus";
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
-               gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+               gpio = <&gpio 10 GPIO_ACTIVE_HIGH>;
                enable-active-high;
        };
 };
@@ -105,15 +105,38 @@
        };
 };
 
-&ethernet {
-       mtd-mac-address = <&factory 0x4>;
-};
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "lan4";
+               };
+
+               port@1 {
+                       status = "okay";
+                       label = "lan3";
+               };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "uart3", "uart2", "jtag", "wdt";
-                       ralink,function = "gpio";
+               port@2 {
+                       status = "okay";
+                       label = "lan2";
                };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan1";
+               };
+
+               wan: port@4 {
+                       status = "okay";
+                       label = "wan";
+               };
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "uart3", "uart2", "jtag", "wdt";
+               function = "gpio";
        };
 };