ramips: convert to new LED color/function format where possible

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_netis_wf2881.dts

diff --git a/target/linux/ramips/dts/mt7621_netis_wf2881.dts b/target/linux/ramips/dts/mt7621_netis_wf2881.dts
index 11aa68d8f1f50531e0196c3665fc733eb8c87022..a13eb0f22227577c394f229fa99b439034358658 100644 (file)
--- a/target/linux/ramips/dts/mt7621_netis_wf2881.dts
+++ b/target/linux/ramips/dts/mt7621_netis_wf2881.dts
@@ -1,9 +1,8 @@
-/dts-v1/;
-
 #include "mt7621.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "netis,wf2881", "mediatek,mt7621-soc";
@@ -14,25 +13,23 @@
                led-failsafe = &led_wps;
                led-running = &led_wps;
                led-upgrade = &led_wps;
-               label-mac-device = &ethernet;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600";
+               label-mac-device = &gmac0;
        };
 
        leds {
                compatible = "gpio-leds";
 
                usb {
-                       label = "wf2881:green:usb";
+                       function = LED_FUNCTION_USB;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
                        linux,default-trigger = "usbport";
                };
 
                led_wps: wps {
-                       label = "wf2881:green:wps";
+                       function = LED_FUNCTION_WPS;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
                };
        };
@@ -72,6 +69,28 @@
                        label = "factory";
                        reg = <0x100000 0x40000>;
                        read-only;
+
+                       nvmem-layout {
+                               compatible = "fixed-layout";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+
+                               eeprom_factory_0: eeprom@0 {
+                                       reg = <0x0 0x200>;
+                               };
+
+                               eeprom_factory_8000: eeprom@8000 {
+                                       reg = <0x8000 0x200>;
+                               };
+
+                               macaddr_factory_e000: macaddr@e000 {
+                                       reg = <0xe000 0x6>;
+                               };
+
+                               macaddr_factory_e006: macaddr@e006 {
+                                       reg = <0xe006 0x6>;
+                               };
+                       };
                };
 
                partition@140000 {
@@ -103,7 +122,8 @@
        wifi@0,0 {
                compatible = "mediatek,mt76";
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
+               nvmem-cells = <&eeprom_factory_8000>;
+               nvmem-cell-names = "eeprom";
                ieee80211-freq-limit = <5000000 6000000>;
 
                led {
@@ -117,7 +137,8 @@
        wifi@0,0 {
                compatible = "mediatek,mt76";
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x0000>;
+               nvmem-cells = <&eeprom_factory_0>;
+               nvmem-cell-names = "eeprom";
                ieee80211-freq-limit = <2400000 2500000>;
 
                led {
@@ -127,8 +148,48 @@
        };
 };
 
-&ethernet {
-       mtd-mac-address = <&factory 0xe000>;
+&gmac0 {
+       nvmem-cells = <&macaddr_factory_e000>;
+       nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+       status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy4>;
+
+       nvmem-cells = <&macaddr_factory_e006>;
+       nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+       ethphy4: ethernet-phy@4 {
+               reg = <4>;
+       };
+};
+
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "lan4";
+               };
+
+               port@1 {
+                       status = "okay";
+                       label = "lan3";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan1";
+               };
+       };
 };
 
 &state_default {