led-upgrade = &led_blue;
};
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
leds {
compatible = "gpio-leds";
stat_r {
label = "k2p:red:status";
- gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
};
stat_y {
label = "k2p:yellow:status";
- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led_blue: stat_b {
label = "k2p:blue:status";
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
};
keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
+ compatible = "gpio-keys";
reset {
label = "reset";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
&spi0 {
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
};
};
-ðernet {
- mtd-mac-address = <&factory 0xe006>;
+&gmac0 {
+ mtd-mac-address = <&factory 0xe000>;
};
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "jtag";
- ralink,function = "gpio";
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
};
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "wan";
+ mtd-mac-address = <&factory 0xe006>;
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "i2c", "jtag";
+ function = "gpio";
};
};