ramips: add support for Ubiquiti UniFi 6 Lite

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_ubnt_unifi.dtsi

diff --git a/target/linux/ramips/dts/mt7621_ubnt_unifi.dtsi b/target/linux/ramips/dts/mt7621_ubnt_unifi.dtsi
new file mode 100644 (file)
index 0000000..e0625ba
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_ubnt_unifi.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       aliases {
+               led-boot = &led_white;
+               led-failsafe = &led_white;
+               led-running = &led_blue;
+               led-upgrade = &led_blue;
+               label-mac-device = &gmac0;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_blue: dome_blue {
+                       label = "blue:dome";
+                       gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
+               };
+
+               led_white: dome_white {
+                       label = "white:dome";
+                       gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       wlan_2g: wifi@0,0 {
+               reg = <0x0 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0>;
+       };
+};
+
+&pcie1 {
+       wlan_5g: wifi@0,0 {
+               reg = <0x0 0 0 0 0>;
+       };
+};
+
+&gmac0 {
+       mtd-mac-address = <&eeprom 0x0>;
+};
+
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "lan";
+               };
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "i2c", "uart2";
+               function = "gpio";
+       };
+};