Revert "ramips: convert MT7915 EEPROM to NVMEM format"

[openwrt/staging/stintel.git] / target / linux / ramips / dts / mt7621_zyxel_nwa-ax.dtsi

diff --git a/target/linux/ramips/dts/mt7621_zyxel_nwa-ax.dtsi b/target/linux/ramips/dts/mt7621_zyxel_nwa-ax.dtsi
index 8dfb2ceaa78281cc43c098d4171146e39765de4d..fa7e23dd47133cf64dfe2234551c37b236975fb5 100644 (file)
--- a/target/linux/ramips/dts/mt7621_zyxel_nwa-ax.dtsi
+++ b/target/linux/ramips/dts/mt7621_zyxel_nwa-ax.dtsi
@@ -37,16 +37,9 @@
                };
 
                factory: partition@100000 {
-                       compatible = "nvmem-cells";
                        label = "factory";
                        reg = <0x100000 0x80000>;
-                       #address-cells = <1>;
-                       #size-cells = <1>;
                        read-only;
-
-                       eeprom_factory_0: eeprom@0 {
-                               reg = <0x0 0xe00>;
-                       };
                };
 
                partition@180000 {
@@ -100,16 +93,9 @@
                };
 
                mrd: partition@7780000 {
-                       compatible = "nvmem-cells";
                        label = "mrd";
                        reg = <0x7780000 0x80000>;
-                       #address-cells = <1>;
-                       #size-cells = <1>;
                        read-only;
-
-                       macaddr_mrd_1fff8: macaddr@1fff8 {
-                               reg = <0x1fff8 0x6>;
-                       };
                };
        };
 };
@@ -123,8 +109,7 @@
                reg = <0x0 0 0 0 0>;
                compatible = "mediatek,mt76";
 
-               nvmem-cells = <&eeprom_factory_0>;
-               nvmem-cell-names = "eeprom";
+               mediatek,mtd-eeprom = <&factory 0x0>;
 
                /* MAC-Address set in userspace */
        };
@@ -144,6 +129,16 @@
        };
 };
 
+&mrd {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_mrd_1fff8: macaddr@1fff8 {
+               reg = <0x1fff8 0x6>;
+       };
+};
+
 &state_default {
        gpio {
                groups = "uart3";