/dts-v1/;
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7628an_hiwifi_hc5x61a.dtsi"
/ {
compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
model = "HiWiFi HC5661A";
- aliases {
- led-boot = &led_system;
- led-failsafe = &led_system;
- led-running = &led_system;
- led-upgrade = &led_system;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
leds {
compatible = "gpio-leds";
led_system: system {
label = "hc5661a:blue:system";
- gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
};
+
internet {
label = "hc5661a:blue:internet";
- gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
};
+
wlan2g {
label = "hc5661a:blue:wlan2g";
- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- label = "reset";
- gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
+ gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
};
};
};
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "refclk", "wled_an";
- ralink,function = "gpio";
- };
- };
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- linux,modalias = "m25p80", "w25q128";
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "hw_panic";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0xf70000>;
- };
-
- partition@fc0000 {
- label = "oem";
- reg = <0xfc0000 0x20000>;
- read-only;
- };
-
- bdinfo: partition@fe0000 {
- label = "bdinfo";
- reg = <0xfe0000 0x10000>;
- read-only;
- };
-
- partition@ff0000 {
- label = "backup";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
+&state_default {
+ gpio {
+ groups = "i2c", "refclk", "wdt", "wled_an";
+ function = "gpio";
};
};
-ðernet {
- mtd-mac-address = <&factory 0x4>;
- mediatek,portmap = "wllll";
+&ehci {
+ status = "disabled";
};
-&wmac {
- status = "okay";
+&ohci {
+ status = "disabled";
};