ramips: add support for Keenetic KN-1613

[openwrt/staging/jow.git] / target / linux / ramips / dts / mt7628an_keenetic_kn-1613.dts

diff --git a/target/linux/ramips/dts/mt7628an_keenetic_kn-1613.dts b/target/linux/ramips/dts/mt7628an_keenetic_kn-1613.dts
new file mode 100644 (file)
index 0000000..4281682
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_keenetic_kn-1613.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "keenetic,kn-1613", "mediatek,mt7628an-soc";
+       model = "Keenetic KN-1613";
+
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_power: power {
+                       label = "green:power";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+               };
+
+               internet {
+                       label = "green:internet";
+                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+               };
+
+               wifi2 {
+                       label = "green:wifi2";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wifi5 {
+                       label = "green:wifi5";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               fn {
+                       label = "fn";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+
+       virtual_flash {
+               compatible = "mtd-concat";
+               devices = <&firmware1 &firmware2>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x0 0x1ec0000>;
+                       };
+               };
+       };
+};
+
+&state_default {
+       gpio {
+               groups = "i2s", "i2c", "gpio", "refclk", "wdt", "wled_an";
+               function = "gpio";
+       };
+};
+
+&usbphy {
+       status = "disabled";
+};
+
+&ehci {
+       status = "disabled";
+};
+
+&ohci {
+       status = "disabled";
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <32000000>;
+
+               partitions: partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-config";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "rf-eeprom";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       firmware1: partition@50000 {
+                               label = "firmware_1";
+                               reg = <0x50000 0xf60000>;
+                       };
+
+                       partition@fb0000 {
+                               label = "config_1";
+                               reg = <0xfb0000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@ff0000 {
+                               label = "dump";
+                               reg = <0xff0000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@1000000 {
+                               label = "u-state";
+                               reg = <0x1000000 0x30000>;
+                               read-only;
+                       };
+
+                       partition@1030000 {
+                               label = "u-config_res";
+                               reg = <0x1030000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@1040000 {
+                               label = "rf-eeprom_res";
+                               reg = <0x1040000 0x10000>;
+                               read-only;
+                       };
+
+                       firmware2: partition@1050000 {
+                               label = "firmware_2";
+                               reg = <0x1050000 0xf60000>;
+                       };
+
+                       partition@1fb0000 {
+                               label = "config_2";
+                               reg = <0x1fb0000 0x40000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&ethernet {
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
+};
+
+&esw {
+       mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+       status = "okay";
+
+       mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       wifi@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0400>;
+               ieee80211-freq-limit = <5000000 6000000>;
+       };
+};
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_4: macaddr@4 {
+               reg = <0x4 0x6>;
+       };
+};