ramips: add support for TP-Link RE200 v2

[openwrt/staging/mkresin.git] / target / linux / ramips / dts / mt7628an_tplink_re200.dtsi

diff --git a/target/linux/ramips/dts/mt7628an_tplink_re200.dtsi b/target/linux/ramips/dts/mt7628an_tplink_re200.dtsi
new file mode 100644 (file)
index 0000000..45d5b8e
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_tplink_re200.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       aliases {
+               label-mac-device = &ethernet;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,57600n8";
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x20000>;
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               compatible = "tplink,firmware";
+                               label = "firmware";
+                               reg = <0x20000 0x7a0000>;
+                       };
+
+                       config: partition@7c0000 {
+                               label = "config";
+                               reg = <0x7c0000 0x30000>;
+                               read-only;
+                       };
+
+                       radio: partition@7f0000 {
+                               label = "radio";
+                               reg = <0x7f0000 0x10000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&config 0x2008>;
+};
+
+&wmac {
+       status = "okay";
+
+       mediatek,mtd-eeprom = <&radio 0x0>;
+       mtd-mac-address = <&config 0x2008>;
+       mtd-mac-address-increment = <1>;
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&radio 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
+               mtd-mac-address = <&config 0x2008>;
+               mtd-mac-address-increment = <2>;
+       };
+};