ramips: mt7628: update dts for upstream gpio-mt7621 driver

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_wiznet_wizfi630s.dts

diff --git a/target/linux/ramips/dts/mt7628an_wiznet_wizfi630s.dts b/target/linux/ramips/dts/mt7628an_wiznet_wizfi630s.dts
index c3a37fad4773a12dbe87e5aee44352fd15e8e38b..bcea56517be4293dc2e962741bd1fc9d764d6aff 100644 (file)
--- a/target/linux/ramips/dts/mt7628an_wiznet_wizfi630s.dts
+++ b/target/linux/ramips/dts/mt7628an_wiznet_wizfi630s.dts
@@ -28,22 +28,22 @@
 
                led_run: run {
                        label = "wizfi630s:green:run";
-                       gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
                };
 
                ledwps {
                        label = "wizfi630s:green:wps";
-                       gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
                };
 
                leduart1 {
                        label = "wizfi630s:green:uart1";
-                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
                };
 
                leduart2 {
                        label = "wizfi630s:green:uart2";
-                       gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -55,25 +55,25 @@
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
 
                wps {
                        label = "wps";
-                       gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+                       gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
                        linux,code = <KEY_WPS_BUTTON>;
                };
 
                scm1 {
                        label = "SCM1";
-                       gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_1>;
                };
 
                scm2 {
                        label = "SCM2";
-                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
                        linux,code = <BTN_2>;
                };
        };