ramips/rt288x,rt3883: Name DTS files based on scheme

[openwrt/staging/jow.git] / target / linux / ramips / dts / rt2880_buffalo_wli-tx4-ag300n.dts

diff --git a/target/linux/ramips/dts/rt2880_buffalo_wli-tx4-ag300n.dts b/target/linux/ramips/dts/rt2880_buffalo_wli-tx4-ag300n.dts
new file mode 100644 (file)
index 0000000..dcd30eb
--- /dev/null
+++ b/target/linux/ramips/dts/rt2880_buffalo_wli-tx4-ag300n.dts
@@ -0,0 +1,125 @@
+/dts-v1/;
+
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       compatible = "buffalo,wli-tx4-ag300n", "ralink,rt2880-soc";
+       model = "Buffalo WLI-TX4-AG300N";
+
+       aliases {
+               led-boot = &led_power;
+               led-failsafe = &led_power;
+               led-running = &led_power;
+               led-upgrade = &led_power;
+       };
+
+       cfi@1f000000 {
+               compatible = "cfi-flash";
+               reg = <0x1f000000 0x800000>;
+               bank-width = <2>;
+               device-width = <2>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "uboot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "uboot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x3b0000>;
+                       };
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <100>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               bandwidth {
+                       label = "bandwidth";
+                       gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               diag {
+                       label = "wli-tx4-ag300n:red:diag";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+               };
+
+               led_power: power {
+                       label = "wli-tx4-ag300n:blue:power";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+               };
+
+               security {
+                       label = "wli-tx4-ag300n:blue:security";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&gpio0 {
+       status = "okay";
+};
+
+&ethernet {
+       status = "okay";
+       mtd-mac-address = <&factory 0x4>;
+
+       port@0 {
+               mediatek,fixed-link = <100 1 1 1>;
+       };
+
+       mdio-bus {
+               status = "okay";
+
+               phy0: ethernet-phy@0 {
+                       phy-mode = "mii";
+                       reg = <0>;
+               };
+       };
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};