ramips: clean up useless dts partition labels
[openwrt/openwrt.git] / target / linux / ramips / dts / rt3052_engenius_esr-9753.dts
index 1f076eaab2f472ab80c84fabf3918c1bc790c578..8f040bf893d12b459208ccff5b2a3e25fe131618 100644 (file)
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "engenius,esr-9753", "ralink,rt3052-soc";
                                read-only;
                        };
 
-                       factory: partition@40000 {
+                       partition@40000 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       macaddr_factory_4: macaddr@4 {
+                                               reg = <0x4 0x6>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "esr-9753:orange:power";
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_ORANGE>;
                        gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
                };
 
                wps {
-                       label = "esr-9753:orange:wps";
+                       function = LED_FUNCTION_WPS;
+                       color = <LED_COLOR_ID_ORANGE>;
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
        };
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0x0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };