ramips/rt305x: Name DTS files based on scheme

[openwrt/staging/jow.git] / target / linux / ramips / dts / rt5350_omnima_miniembplug.dts

diff --git a/target/linux/ramips/dts/rt5350_omnima_miniembplug.dts b/target/linux/ramips/dts/rt5350_omnima_miniembplug.dts
new file mode 100644 (file)
index 0000000..5db1ce4
--- /dev/null
+++ b/target/linux/ramips/dts/rt5350_omnima_miniembplug.dts
@@ -0,0 +1,129 @@
+/dts-v1/;
+
+#include "rt5350.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "omnima,miniembplug", "ralink,rt5350-soc";
+       model = "Omnima MiniEMBPlug";
+
+       leds {
+               compatible = "gpio-leds";
+
+               wlan {
+                       label = "miniembplug:red:wlan";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+               };
+
+               mobile {
+                       label = "miniembplug:green:mobile";
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&ohci_port1>, <&ehci_port1>;
+                       linux,default-trigger = "usbport";
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               mode-one {
+                       label = "mode1";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               mode-two {
+                       label = "mode2";
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "jtag", "uartf";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&gpio0 {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+};
+
+&esw {
+       mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};