ramips: convert to new LED color/function format where possible

[openwrt/openwrt.git] / target / linux / ramips / dts / rt5350_poray_x8.dts

diff --git a/target/linux/ramips/dts/rt5350_poray_x8.dts b/target/linux/ramips/dts/rt5350_poray_x8.dts
index db48a034074a2a1e7416733086022fa5c8cae5b3..a4284342d04a7cffb58b343e109b9433f8a1868e 100644 (file)
--- a/target/linux/ramips/dts/rt5350_poray_x8.dts
+++ b/target/linux/ramips/dts/rt5350_poray_x8.dts
@@ -1,9 +1,8 @@
-/dts-v1/;
-
 #include "rt5350.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "poray,x8", "ralink,rt5350-soc";
@@ -20,7 +19,8 @@
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "x8:green:power";
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
@@ -40,7 +40,7 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
@@ -66,6 +66,20 @@
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       macaddr_factory_4: macaddr@4 {
+                                               reg = <0x4 0x6>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
@@ -85,7 +99,8 @@
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0x4>;
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {
@@ -94,14 +109,7 @@
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
        ralink,led-polarity = <1>;
-};
-
-&ehci {
-       status = "okay";
-};
-
-&ohci {
-       status = "okay";
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };