move files to files-3.7

[openwrt/openwrt.git] / target / linux / ramips / files / arch / mips / ralink / rt288x / setup.c

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/setup.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/setup.c
deleted file mode 100644 (file)
index be474b5..0000000
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/setup.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Ralink RT288x SoC specific setup
- *
- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Ralink's 2.6.21 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <asm/mips_machine.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-
-#include <asm/mach-ralink/common.h>
-#include <asm/mach-ralink/rt288x.h>
-#include <asm/mach-ralink/rt288x_regs.h>
-#include "common.h"
-
-static void rt288x_restart(char *command)
-{
-       rt288x_sysc_wr(RT2880_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
-       while (1)
-               if (cpu_wait)
-                       cpu_wait();
-}
-
-static void rt288x_halt(void)
-{
-       while (1)
-               cpu_wait();
-}
-
-unsigned int __cpuinit get_c0_compare_irq(void)
-{
-       return CP0_LEGACY_COMPARE_IRQ;
-}
-
-void __init ramips_soc_setup(void)
-{
-       struct clk *clk;
-
-       rt288x_sysc_base = ioremap_nocache(RT2880_SYSC_BASE, RT2880_SYSC_SIZE);
-       rt288x_memc_base = ioremap_nocache(RT2880_MEMC_BASE, RT2880_MEMC_SIZE);
-
-       rt288x_clocks_init();
-
-       clk = clk_get(NULL, "cpu");
-       if (IS_ERR(clk))
-               panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
-
-       printk(KERN_INFO "%s running at %lu.%02lu MHz\n", ramips_sys_type,
-               clk_get_rate(clk) / 1000000,
-               (clk_get_rate(clk) % 1000000) * 100 / 1000000);
-
-       _machine_restart = rt288x_restart;
-       _machine_halt = rt288x_halt;
-       pm_power_off = rt288x_halt;
-
-       clk = clk_get(NULL, "uart");
-       if (IS_ERR(clk))
-               panic("unable to get UART clock, err=%ld", PTR_ERR(clk));
-
-       ramips_early_serial_setup(0, RT2880_UART0_BASE, clk_get_rate(clk),
-                                 RT2880_INTC_IRQ_UART0);
-       ramips_early_serial_setup(1, RT2880_UART1_BASE, clk_get_rate(clk),
-                                 RT2880_INTC_IRQ_UART1);
-}
-
-void __init plat_time_init(void)
-{
-       struct clk *clk;
-
-       clk = clk_get(NULL, "cpu");
-       if (IS_ERR(clk))
-               panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
-
-       mips_hpt_frequency = clk_get_rate(clk) / 2;
-}