foo
[openwrt/staging/blogic.git] / target / linux / ramips / files-4.14 / drivers / net / ethernet / mediatek-old / soc_rt3883.c
diff --git a/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek-old/soc_rt3883.c b/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek-old/soc_rt3883.c
new file mode 100644 (file)
index 0000000..4935b7f
--- /dev/null
@@ -0,0 +1,75 @@
+/*   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; version 2 of the License
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   Copyright (C) 2009-2015 John Crispin <blogic@openwrt.org>
+ *   Copyright (C) 2009-2015 Felix Fietkau <nbd@nbd.name>
+ *   Copyright (C) 2013-2015 Michael Lee <igvtee@gmail.com>
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "mtk_eth_soc.h"
+#include "mdio_rt2880.h"
+
+#define RT3883_RSTCTRL_FE              BIT(21)
+
+static void rt3883_fe_reset(void)
+{
+       fe_reset(RT3883_RSTCTRL_FE);
+}
+
+static int rt3883_fwd_config(struct fe_priv *priv)
+{
+       int ret;
+
+       ret = fe_set_clock_cycle(priv);
+       if (ret)
+               return ret;
+
+       fe_fwd_config(priv);
+       fe_w32(FE_PSE_FQFC_CFG_256Q, FE_PSE_FQ_CFG);
+       fe_csum_config(priv);
+
+       return ret;
+}
+
+static void rt3883_init_data(struct fe_soc_data *data,
+                            struct net_device *netdev)
+{
+       struct fe_priv *priv = netdev_priv(netdev);
+
+       priv->flags = FE_FLAG_PADDING_64B | FE_FLAG_PADDING_BUG |
+               FE_FLAG_JUMBO_FRAME | FE_FLAG_CALIBRATE_CLK;
+       netdev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+               NETIF_F_RXCSUM | NETIF_F_HW_VLAN_CTAG_TX;
+}
+
+static struct fe_soc_data rt3883_data = {
+       .init_data = rt3883_init_data,
+       .reset_fe = rt3883_fe_reset,
+       .fwd_config = rt3883_fwd_config,
+       .pdma_glo_cfg = FE_PDMA_SIZE_8DWORDS,
+       .rx_int = FE_RX_DONE_INT,
+       .tx_int = FE_TX_DONE_INT,
+       .status_int = FE_CNT_GDM_AF,
+       .checksum_bit = RX_DMA_L4VALID,
+       .mdio_read = rt2880_mdio_read,
+       .mdio_write = rt2880_mdio_write,
+       .mdio_adjust_link = rt2880_mdio_link_adjust,
+       .port_init = rt2880_port_init,
+};
+
+const struct of_device_id of_fe_match[] = {
+       { .compatible = "ralink,rt3883-eth", .data = &rt3883_data },
+       {},
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);